Packaged Smart Pump Station
Integrated Carbon Steel Smart Pump Room for Weifang University
01 / Projects in the field
Project overview
Campus water supply system installed and commissioned
The smart pump room project at Weifang University, delivered by Hefei EPNNEL Water Supply Technology Co., Ltd., has completed on-site installation and system commissioning and is ready for operation. Designed for campus secondary water supply, the integrated enclosure brings together the pump units, pipework and valves, automatic controls, environmental monitoring and remote management platform.
Pump units and pipework
The project uses a BF-7000×3500×3185mm integrated carbon steel smart pump room, a WWG300-40-3 non-negative-pressure water supply station and 3 ALT95-2-15 SHIMGE permanent-magnet pumps. Wetted components, including impellers and pump shafts, are made of 304 stainless steel. The control cabinet uses Schneider components, with a BHT-200VL-S1.0MPa stainless steel pressure vessel, a Φ1000×2000 non-negative-pressure vessel and matching stainless steel pipework and valves. A vacuum suppressor helps prevent negative pressure in the supply network and maintain stable delivery pressure.
Data acquisition and remote management
An SGK-YC data acquisition cabinet integrates a Siemens PLC, a 10-inch colour touchscreen, a UPS and a hard disk video recorder. The remote monitoring and management platform can be accessed from a computer or a WeChat mini program. It collects operating data from the secondary water supply equipment and pump units and supports remote monitoring and control, helping operators follow equipment status.
Integrated enclosure and environmental equipment
The enclosure uses a galvanised square-tube frame and coated Q235 carbon steel exterior panels. The interior includes sound-absorbing wall lining, a 50mm aluminium silicate fire-resistant insulation layer and 304 stainless steel moisture-resistant wall lining. LED lighting, axial ventilation fans, temperature and humidity, noise and smoke sensors, an inverter air conditioner and a dehumidifier provide the environmental equipment. A smart door lock and dry powder fire extinguisher are also provided. Custom logo and university motto lightboxes and outdoor signage connect the installation with its campus setting.
On-site commissioning and after-sales service
Equipment positioning, pipe connections, cabling and integrated system commissioning have been completed on site. According to the project handover documentation, equipment parameters, communications and protection logic have been checked. The integrated configuration supports centralised management and routine maintenance of the campus water supply equipment. EPNNEL will continue to provide after-sales follow-up. The photographs below show the campus installation setting, the enclosure, internal equipment and illuminated signage at night.
Project photographs
02 / Projects in the field
On-site gallery
Select a photograph to view the full-screen gallery.




Back